貼金是一種傳統(tǒng)、特殊的工藝，銅佛像在制作出來之后，往往需要為佛像進行貼金的處理，有句俗話說得好，佛要金裝，人要衣裝，那么銅佛像是怎么進行貼金的呢？下面我們一起了解一下。

The gilding is a traditional and special process. After the bronze Buddha statues are made, they often need to be gilded. As the saying goes, the Buddha needs gold and the people need clothes. So how do the bronze Buddha statues gild? Let's take a look.

1、貼金佛像一般是大型泥塑的，為了襯托金色，需要先在佛像表面上一層黃底色，然后在表面上一層桐油，稍微晾干后就可以貼。

1. The golden Buddha statue is usually a large clay sculpture. To set off the gold, you need to first apply a yellow background on the surface of the Buddha statue, and then apply a layer of tung oil on the surface, which can be pasted after being slightly dried.

2、晾干時候的火候很重要，要適當。太干了貼不上，太粘了變形貼不平整。這可以說是一個憑經(jīng)驗干的活兒。

2. The temperature when drying is very important and should be appropriate. It is too dry to paste, and it is too sticky, deformed and uneven. This can be said to be a job done by experience.

3、把輕輕貼到佛像表面后，用毛筆一點一點壓實，讓完全伏貼在沒有完全干的桐油上，當佛像的表面全部貼滿后就基本完成了。

3. After gently pasting it on the surface of the Buddha statue, use a brush to compact it bit by bit, so that it can be completely pressed on the partially dried tung oil. When the surface of the Buddha statue is completely pasted, it is basically completed.